HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

LO
Chapter 2: Persist Control Center PCC Views, Detailed Descriptions
2-62 HP StorageWorks Reference Information Storage System Administrator Guide, April 2004
– Assume State Retention – (Typically, you will use the default value, Yes .)
Choose
Yes to use the last recorded status value before PCC startup
as the status value to assume for periods when monitoring was down.
– Initial States Logged – Not used
– Ignore Repeated States – Not used
4. Click
Create Report to create the report.
The following table describes the
Alert Histogram report features.
The same status colors are used in both charts: the graph and the event
breakdowns. For descriptions of the possible status values, see
Host and
Service Status Value Definitions
, page 1-6.
In addition to the report features described above, the report view has an
input form at the upper right that you can use to update the report. After
changing report options, click the
Update button to regenerate the report with
the new options. The input form options you can set are the same as those
you used to create the displayed report:
Report period , Assume state retention , and
so on.
Table 2-60: Alert Histogram Report Features
Feature Description
heading • Name of the host or service reported on
• The covered report period
Event History A color-coded graph indicating the host/service event history
over the reported time period. See
Host and Service Status
Value Definitions
, page 1-6, for information on color coding of
status values.
event breakdowns Summary chart showing the number of events associated with
each host/service status value over the covered time period.
Minimum, maximum, total, and average number of events are
reported. The same status value colors are used as in the Event
History graph.