HP Reference Information Storage System Version 1.6 Administration Guide revision 2 (T3559-90809, September 2007)

• DocRef Host: Select the DocRef Host check box and enter the VI P of the RISS domain
for which mailbox m ining is being set up. See "Enabling load balancing message by
message" on page 123 for information on enhancing performance during HTTP queries.
• Use TNEF: Select the Use TNEF check box if you want to change the default value from No to
Yes. If Yes is selected, messages will be sent to the RISS in TNEF format.
• Ensure Owner Receipt: Select the Ensure Owner Receipt check box and indicate whether a copy
of the message should be sent to the mailbox owner’s repository if the owner is not included
in the recipients list.
• Trim Attachments: Select the Trim Attachments check box if you want to change the Trim
Attachments default value from Yes to No. By d efault, attachments are removed from the message
and replaced with ArchiveInfo.htm, which describes how to retrieve the original attachments.
• Trim Message Body: Select the Trim Message Body check box if you want to change the Trim
MessageBodydefaultvaluefromNo to Yes. If Yes is selected, the message b ody is removed.
If the message body is removed from the Exchange server, you can only conduct a message
content search using the RISS Web Interface.
NOTE:
The Trim Message Body option allows for removing bodies from existing tombstones, whereas "trimming
attachments" does not. The logic empties the body and updates the message even if the body was
previously trimmed.
After making the changes, click Apply, and then click Close to finalize the changes.
Clicking the Advanced button allows changes to be made that override default settings in the RISS.ini
initialization file.
CAUTION:
AnychangesmadethiswayshouldonlybedoneunderthesupervisionofHPtechnicalsupport.
Administrator Guide
125