HP Reference Information Storage System Version 1.6 Administration Guide revision 2 (T3559-90809, September 2007)

You must enter criteria for all searches excep t Show All Alerts.
The search function uses the “Like” SQL database capability. For example, you could enter sc to
match host names sc-s1-172-1.company.com or sc-s2-204-1.company.com. Entering %204% would
match hosts sc-s2-204-1.company.com, or ms-s0-204-1.company.com.
Searches are not case sensitive.
3. Click Submit.
Other Event Viewer features
You can change the number of events displayed on each Event Viewer page by following these steps:
1. Go to the Events Per Page drop-down list in the bottom right corner of the view.
2. Select the number of events to show on the page, and click First.
You can delete events from the Event Viewer by following these steps:
1. Select an event or go to the time period drop-down list in the bottom left corner of the view.
2. Click Delete in the bottom left corner of the view.
SNMP Management
Use the SNMP Management view to perform the following actions:
• Download the RISS MIB.
• Set the SNMP monitoring management server.
• Select SNMP traps for monitoring.
• Receive SNMP events via email.
• Set SNMP community.
Table 45 Links to SNMP Management view
Origin
Link
left menu
Reporting > SNMP Management
Downloading the RISS MIB
The RISS MI B (management information base) allows monitoring applications such as HP OpenView to
recognize SNMP events coming from the RISS system.
In the M I B Manager Service area, click the Download button to copy the RISS MIB file to your loc a l
machine. To import the MI B, refer to the documentation for your monitoring managem ent software.
Setting the SNMP server
In the SNMP Ser ver Monitors area, enter the IP address of the monitoring management ser ver, then
click Add Se rver.
You can enter more than one IP address, since the SNMP information can be broadcast to multiple
servers, or receivers.
NOTE:
Always enter the IP address of the server; do not enter the hostname.
Use of a server can b e enabled or disabled by clicking the radio but ton in front of the server entr y,
then clicking Toggle Enabled/Disabled.
74
Reporting