HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Install function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 79 Detailed Info: Set Speed Mode Operation
DescriptionItem
The Channel Adapter (CHA) name (name of channel adapter).Channel Adapter
(CHA)
The port block. Port blocks A and B are output.Port Block
The mode set to the port.Mode
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
The number of port blocks in the channel adapter.Num. of Blocks
The number of channel adapters that the mode is changed.Num. of Channel
Adapters (CHA)
Install - Set Subsystem Time Operation
Example 1 (The case of TOD Change)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,TOD Change,
Normal end,,,Seq.=xxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2 (The case of Synchro. Infor.)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,,,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}={Valid,(123.456.789.123),100,
Tokyo Standard Time,23}
[Install]
Install function
Set Subsystem Time
Set Subsystem Time operation
TOD Change and Synchro. Infor
XP24000 Audit Log User and Reference Guide 103