HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Detailed information displays for this operation, as shown in the following table.
Table 151 Detailed Info: Add Path Operation
DescriptionItem
Indicates a serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
The path group ID. When the path group ID is default setting, Default is output.Path Gr. ID
The controller ID.Controller ID
The SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of port pairs set.Num. of Port Pairs
Remote Control Unit (RCU) - Add RCU Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N, MCU LDKC,RCU LDKC,Path Gr. ID,Controller ID,Min. Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,Default,4,08,015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],
Num. of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,MCU,RCU,SSID,Controller ID,Min. Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,0x00,0x3f,0x0004,4,08,
015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Add RCU
Add Remote Control Unit operation
Normal end
The operation has ended normally.
XP24000 Audit Log User and Reference Guide 161