HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

DescriptionItem
The round-trip response time (delay time for round-trip remote I/O) after change. The
unit is in milliseconds. This value is output when HP XP Continuous Access Software or
HP XP Continuous Access Software for Mainframeis used.
Round Trip
Time(ms)
The incident of RCU after change. This value is output only when HP XP Continuous
Access Software for Mainframeis used.
Incident
“only to RCU host” or “to any host” is output.
Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support is enabled or
disabled. This value is output only when HP XP Continuous Access Software for
Mainframeis used.
FREEZE
Enable or Disable is output.
The number of port pairs changed.Num. of Port Pairs
Remote Control Unit (RCU) - Delete Path Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,Path Gr. ID,Controller ID}={99999,0x00,Default,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],
Num. of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,SSID,Controller ID}={99999,0x00,0x0004,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Delete Path
Delete Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Sample Audit Logs164