HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Suspend Mode,Result}=}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,P-VOL,Disable,
Volume,
Flush, Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x00,0x01,65432,5,P-VOL,Disable,Volume,Flush,Normal end},
Num. of Pairs=2
[UR z/OS]
HP XP Continuous Access Journal Software for Mainframe function (for IBM z/OS)
Suspend-Pair
Suspend-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 216 Detailed Info: Suspend-Pair Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
The LDKC, CU and LDEV numbers of the secondary data volume.S-VOL(LDKC:CU:LDEV)
The mirror ID.MirrorID
The serial number of the logical device storage system.S/N
The controller ID.CTRLID
Indicates whether the split data volume is a primary or secondary data volume.Type
P-VOL: Primary, S-VOL: Secondary
Indicates whether writing to the secondary volume is enabled or not.S-VOL Write
Disable: Disabled, Enable: Enabled
The split range.Range
Volume: Volume range, Group: Group range
The suspend mode.Suspend Mode
Purge: Purge mode, Flush: Flush mode
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of pairs.Num. of Pairs
Sample Audit Logs224