HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Note 4: When you set two or more port settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as one
entry.
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
Change 1 –> Change 2: Log information is output for the Change 2 operation.
Note 5: When you set two or more LUSE settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as one
log information file. For example, if you have created one LUSE volume and then created another
LUSE volume using the previously-created LUSE volume, the log information is output just as Make
LUSE.
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
• Create LUSE volume –> Delete LUSE volume: The operations cancel each other, and the log
information is not output.
• Create LUSE volume 1 –> Create LUSE volume 2 –> Create LUSE volume 3 using LUSE volume
1 and LUSE volume 2 –> Delete LUSE volume 3: Log information is output only for the Create
LUSE volume 1 operation and Create LUSE volume 2 operation.
Note 6: The log information is output at the end, no matter when you perform the Cache Residency
Manager operation.
Note 7: Indicates the operation when iSCSI port is selected in the Authentication tab.
Audit Log Information File Output by Function268