HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{CHA,Kind}={CHA-1LU,16FS Fibre 8ch-4mp},
++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number}
=[{9J,Standard,Target,Auto,00:00-00:FE},{BJ,Standard,Target,Auto,00:00-00:FE},
-{DJ,Standard,Target,Auto,00:00-00:FE},{FJ,Standard,Target,Auto,00:00-00:FE},
{9K,Standard,Target,Auto,00:00-00:FE},{BK,Standard,Target,Auto,00:00-00:FE},
-{DK,Standard,Target,Auto,00:00-00:FE},{FK,Standard,Target,Auto,00:00-00:FE}],
Num. of Ports=8
+{CHA,Kind}={CHA-1KU, 8M Mfibre 4ch-4mp},
++{Port,HTP,CU Number,Emulation}=[{9N,HTP,00:00-00:3F,H-6591-2},
{BN,HTP,00:00-00:3F,H-6591-2},{DN,HTP,00:00-00:3F,H-6591-2},{FN,HTP,00:00-00:3F,
H-6591-2}],
Num. of Ports=4
+{CHA,Kind}={CHA-2XU,16FS Fibre 8ch-4mp},
++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number}
=[{AJ,Standard,Target,Auto,00:00-00:FE},{CJ,Standard,Target,Auto,00:00-00:FE},
-{EJ,Standard,Target,Auto,00:00-00:FE},{GJ,Standard,Target,Auto,00:00-00:FE},
{AK,Standard,Target,Auto,00:00-00:FE},{CK,Standard,Target,Auto,00:00-00:FE},
-{EK,Standard,Target,Auto,00:00-00:FE},{GK,Standard,Target,Auto,00:00-00:FE}],
Num. of Ports=8
+{CHA,Kind}={CHA-2WU, 8M Mfibre 4ch-4mp},
++{Port,HTP,CU Number,Emulation}=[{AN,HTP,00:00-00:3F,H-6591-2},
{CN,HTP,00:00-00:3F,H-6591-2},
{EN,HTP,00:00-00:3F,H-6591-2},{GN,HTP,00:00-00:3F,H-6591-2}],Num. of Ports=4
+Num. of CHAs=4
[Install]
Install function
Install
Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 49 Detailed Info: Install Operation (Installing Additional Channel Adapters)
DescriptionItem
The channel adapter (CHA) mounting location.Channel Adapter
(CHA)
The kind of PCB mounted.Kind
The mounting location of the port.Port
The speed mode of the Fibre PCB is indicated for open systems.Fibre PCB Mode
<Standard>: Standard mode. <High Speed/MIX>: High speed mode/Mix mode.
The type of Initiator or Target.Initiator/Target
XP24000 Audit Log User and Reference Guide 79