HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Install - Cache Residency Manager for z/OS (M/F DCR)
Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],M/F DCR,,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start CC-HH,End CC-HH}=[{Set,Bind,No,00-00,00-10},
{Set,Priority,Yes,1000-00,1009-14}],{Delete,-,-,1000-00,1009-14}],
Num. of DCR Settings=3
[Install]
Install function
M/F DCR
M/F DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 63 Detailed Info: Cache Residency Manager for z/OS (M/F DCR) Operation
DescriptionItem
The LDKC number, the CU number and the LDEV number of the logical volume (for a
mainframe system) where Cache Residency is set.
LDKC:CU:LDEV
The setting status of Cache Residency.Define
Set: set, Delete: cancel
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.Mode
Bind: Bind mode, Priority: Priority mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-)
when Define is Delete.
Prestaging
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
The starting cylinder number (CC) and the starting head number (HH) which the Cache
Residency is set or canceled.
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) which the Cache
Residency is set or canceled.
End CC-HH
The number of Cache Residency which has been set or canceled.Num of DCR
Settings
XP24000 Audit Log User and Reference Guide 91