HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Install function
Set Channel Speed
Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 70 Detailed Info: Set Channel Speed Operation
DescriptionItem
The name of the port that the channel speed is set.Port
The channel speed set.Speed(Gbps)
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, Auto: Auto mode.
The number of ports where the channel speed is set.Num. of Ports
Install - Set Command Device (CommandDev) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDev,,Normal end,,,
Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
[Install]
Install function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 71 Detailed Info: Set Command Device (CommandDev) Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the logical volume where the command device is
set.
LDKC:CU:LDEV
XP24000 Audit Log User and Reference Guide 97