Guidelines for using IBM DB2 Universal Database (UDB) with HP StorageWorks Storage Mirroring (T2558-96335, June 2009)

3. Install DB2 on the target using the same drive and directory specifications recorded in step 2.
The DB2 installation must be identical on the source and target.
4. By default, DB2 services are set to automatic startup. You must stop the services listed in Managing
DB2 services Managing DB2 services, page 10 and set them to manual startup on the target.
This ensures that all DB2 files are closed on the target and the Storage Mirroring source can
replicate the changes.
5. On the target, enable Block Checksum All Files on a Difference Mirror and click OK.
Configure and begin mirroring and replication
1. Select Start, Programs, Storage Mirroring, Management Console.
2. Double-click your source machine to log on.
3. Right-click on the source and select Properties.
4. On the Source tab, enable Block Checksum All Files on a Difference Mirror and click OK.
5. Right-click your source machine and select New, Replication Set and enter the desired name for
the replication set.
6. Select the DB2 data you wish to protect. For more information about what you should include in
your replication set, see Configuring the replication set Configuring the replication set, page 10.
7. Right-click the replication set name and select Save to save the replication set.
8. Drag and drop the replication set onto the target. The Connection Manager dialog box opens.
9. The Source Server, Target Server, Replication Set, and Route fields will automatically be populated.
If you have multiple IP addresses on your target, verify the Route field is set to the correct network
Sample Implementation14