HP StorageWorks Storage Mirroring Reporting Center User's Guide (T5437-96025, November 2010)

Troubleshooting Page 30 of 35
l Testing WMI connectivity—To test WMI connectivity between Reporting Center
and a Storage Mirroring server, select Start, Run, and enter the command
WBEMTest. On the Windows Management Instrumentation Tester, click Connect.
Modify the Namespace to \\server_name\root\cimv2, where server_name is the
name of the Storage Mirroring server. Specify a User (domain\user) with access to
the Storage Mirroring server and the Password associated with that user. Click
Connect. The command will indicate if there is a failure. No errors indicate
success.
l WMI and DCOM—In order for WMI to collect server information, DCOM must be
enabled. By default it is enabled. If you need to view or modify DCOM, use the see
the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\OLE\EnableDCOM.
If you have to modify the key to enable it, you must reboot the server to apply the
change.