HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Detailed information displays for this operation, as shown in the following table.
Table 112 Detailed Info: Set Fibre-Channel Security Protocol (FCSP) Port Info Operation
DescriptionItem
The name of the port where authentication parameter has been set.Port
The time to execute authentication after the failure of port authentication. The unit is
second.
Auth_TOV
The period of time to reject authentication when port authentication have failed. The unit
is minute.
Reject Time
The number of authentication failures allowed before port authentication is rejected.Reject Count
The number of ports where authentication parameter has been set.Num. of Ports
LUN Manager (LUNM) - Set Fibre-Channel Security Protocol
(FCSP) Port Switch Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Set FCSP Port Switch,,Normal end, Seq=xxxxx
+{Port,Switch,DH Group,Auth,UserName}=[{1E,Enable,0,Interactive,1111111111111111},
{3E,Disable,0,One Direction,2222222222222222}],Num. of Ports=2
[LUNM]
LUN Manager function
Set FCSP Port Switch
Set FCSP Port Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 113 Detailed Info: Set Fibre-Channel Security Protocol (FCSP) Port Switch Operation
DescriptionItem
The name of the port where authentication parameter has been set.Port
The setting status whether to execute authentication by port.Switch
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)DH Group
The setting status of authentication method.Auth
Sample Audit Logs130