HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

LUN Manager (LUNM) - Set Fibre Topology Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Set Fibre Topology,,Normal end,,,
Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],
Num. of Ports=4
[LUMN]
LUN Manager function
Set Fibre Topology
Set Fibre Topology operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 117 Detailed Info: Set Fibre Topology Operation
DescriptionItem
The name of the port where the topology of Fibre Channel is changed.Port
Indicates whether the Fabric switch is enabled or disabled.Fabric
Disable or Enable is output.
The connecting mode of the Fabric switch selected.Connection
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is changed.Num. of Ports
LUN Manager (LUNM) - Set Host Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Host Mode,,Normal end,,,
Seq.=xxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX,0x00,
0x20000000,
0x00000000,0x00000000},{XX,0xXXX,0x09,0x00080000,0x00000000,0x00000000}],
Num.of Host Groups=2
[LUNM]
LUN Manager function
Set Host Mode
Sample Audit Logs134