HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 175 Detailed Info: Change Consistency Group (CTG) Option
DescriptionItem
The LDKC number.LDKC
The consistency group number of the consistency group (CT group) where the option is
changed.
CTG
The value set to the monitoring time of transfer to the side file. The unit is second.Offloading(s)
Indicates whether the inflow control to the cache is enabled or disabled.Inflow Control
Enable: Setting is enabled, Disable: Setting is disabled
The setting value for Time Out (Copy Pending). The unit is minute. When Time Out (Copy
Pending) is set to 0 (zero), None is output.
Copy Pending(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out (RCU
ready) is set to 0 (zero), None is output.
RCU Ready(min.)
HP XP Continuous Access Software - Change Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC], Change Option,,Normal end,,,
Seq.=xxxxx
+{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s),
Service SIM,Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s), Parallel Initial Copy(CU)}=
-{0x00,0x00,Not Report,Yes,600,4},{0x00,0x01,Not Report,Yes,600,4},{0x00,0x02,
Not Report,
Yes,600,4},{0x00,0x03,Not Report,Yes,600,4},{0x00,0x04,Not Report,Yes,600,4},
(snip)
-(snip), Num. of CUs=255
[TC]
HP XP Continuous Access Software function
Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Sample Audit Logs184