HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Pairresync
Pairresync operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 180 Detailed Info: Pairresync Operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the restored
pair sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the
restored pair sequentially.
S-VOL(Port-G-ID-LUN)
The fence level set (the condition that MCU rejects Write to the primary volume).Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of restoring operation set (scheduling order).Priority
The resume range set (the range to restore the asynchronous pair). This value is
output when the asynchronous pair is restored only.
Range
Group: Group (all asynchronous pairs in the consistency group),
LU: LU (appropriate asynchronous pair only)
The error level set (handling in case of trouble). This value is output when the
asynchronous pair is restored only.
Error Level
Group: Group (all asynchronous pairs in the consistency group)
LU: LU (appropriate asynchronous pairs only)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of restored pairs.Num. of Pairs
HP XP Continuous Access Software - Pairsplit-r Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Pairsplit-r,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type, S-VOL Write,Kind,Range,Mode,
Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,Disable,S-VOL,Group,Drain,Normal End},
XP24000 Audit Log User and Reference Guide 189