HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

HP XP Auto LUN Software (VM) - Set Reserved Vol Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VM],Set Reserved Vol,,Normal end,,,
Seq.=xxxxxx
+{Set,LDKC:CU:LDEV,Result}=[{Reserved,0x00:0x00:0x00,Normal end},
{ Reserved,0x00:0x00:0x01,Normal end},{ Reserved,0x00:0x00:0x02,Normal end},
{ Reserved,0x00:0x00:0x03,Normal end},{ Reserved,0x00:0x00:0x04,Normal end},
{ Reserved,0x00:0x00:0x05,Normal end},
{ Reserved,0x00:0x00:0x06,Normal end}] Num. of LDEVs = 7
[VM]
HP XP Auto LUN Software function
Set Reserved Vol
Set Reserved Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 234 Detailed Info: Set Reserved Vol Operation
DescriptionItem
The operation executed to the logical volume.Set
Normal: Set to the normal volume
Reserved: Set to the reserved volume of HP XP Auto LUN Software
The ID of the logical volume which the setting is changed. The number on the left of the
colon is an LDKC number, the number between the colons is a CU number and the
number on the right of the colon is an LDEV number.
LDKC:CU:LDEV
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed
xxxx: Part code, yyyyy: Error code
The number of logical volumes which the setting is changed.Num. of LDEVs
HP XP Disk/Cache Partition - Set Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VPM],Set,,Normal end,,,Seq.=xxxxxx
+Delete SLPR=[xx,xx],Num. of SLPRs=xx
+Delete CLPR=[xx,xx],Num. of CLPRs=xx
+SLPR=xx:xxxxxxxxxxxxxx,Operation=xxxxx
++Port=[CLx-x,CLx-x],Num. of Ports=xx
XP24000 Audit Log User and Reference Guide 239