HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

ExplanationItemNo.
Year, month and day the audit log was created (YYYYMMDD).Date3
Hour, minute, second and millisecond the audit log was created
(HH:MM:SSxxx).
Time4
The time difference between Universal Time (UT) and the local
time appears as ±HH:MM (HH: hour, MM: minute).
Time zone5
The abbreviation indicating the function or option which has been
used to perform the setting operation is output.
Function name6
The operation or option name.Operation or event name7
See Table 8 for a list of functions and how they relate to operations
or options. See Appendix A on page 255 for the relationship
between GUI operation and the operation name output to audit
log information files for each option. See Appendix B on page
269 for the relationship between operation of SVP and the operation
name output to audit log information files.
Parameters for certain functions, such as Modify for the
ChangeMode operation.
Parameters8
For some operations, such as Paircreate, parameters display as
detailed information on the following line or lines. These detailed
parameters include an Index and the Values you set (see Figure 2).
The end result of your operation.Operation result9
Normal end. The operation has ended normally.
Error (xxxx-yyyyy). The operation has ended abnormally and an
error code appears.
Warning (xxxx-yyyyy). The operation has partly ended abnormally
or was canceled during the operation.
For more information, see the HP StorageWorks XP24000 Remote
Web Console Error Codes. SVP operations do not output error
codes.
Displays identification information (WWM, Ipv4 address, Ipv6
address, and serial number) of the host that sent log information.
Identification information of host
sending the log
10
Displays application identification information.Identification information of
application
11
The sequence number of the saved log information (0000000000
to 4294967295). When the number reaches 4,294,967,295, it
is reset to 0000000000.
Log information sequence
number
12
Table 5 Symbols Used in Detailed Parameter Information
DefinitionSymbol
+ or - appears at the beginning of a line.+ and -
Audit Log File Format28