HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Over Threshold event
Normal end
The operation has ended normally.
Audit Log - Set Syslog Server Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Audit Log],Set Syslog Server
,DetailFlg=Enable,
Normal end,,,Seq.=xxxxx
+DetailFlg=Enable
+LocationInfo=USP001
+{ServerType,IPAddrVer,OutFlg,SrvAddr,SrvPortNum}=[{Primary,IPv4,Disable,
192.168.0.1,514},
{Secondary,-,Enable,192.168.10.111,-}]
[Audit Log]
Audit Log function
Set Syslog Server
Set System Log Server operation
Detail Flag=Enable
Enable is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 9 Parameters: Audit Log Set Syslog Server Info Operation
DescriptionParameter
Detailed information is output to the syslog server.Detail Flag=Enable
Detailed information is not output to the syslog server.Detail Flag=Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in the following table.
Table 10 Detailed Info: Audit Log Set Syslog Server Info Operation
DescriptionItem
Indicates whether to output detailed information to the syslog server.DetailFlg
Enable: Output detailed information. Disable: Do not output detailed information.
The location identification information for the storage system. Not output when setting
is not changed.
LocationInfo
XP24000 Audit Log User and Reference Guide 45