HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Expiration-Lock
Expiration-Lock operation
SLPR#xx:Enable
SLPR#xx: Enable is selected as the parameter. The operation uses the following parameters, as shown
in the following table.
Table 24 Parameters: Data Retention Utility (DRU) Expiration-Lock Operation
DescriptionParameter
The expiration-lock setting is enabled for SLPR number xx.SLPR#xx:Enable
The expiration-lock setting is disabled for SLPR number xx.SLPR#xx:Disable
The expiration-lock setting is enabled in the storage system.SYSTEM:Enable
The expiration-lock setting is disabled in the storage system.SYSTEM:Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
FC - Set SCP Time Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[FC],Set SCP Time,,Normal end,,,Seq.=xxxxx
+{LDKC,CU,SCP Time(s)}=
-[{0x00,0x00,600},{0x00,0x01,600},{0x00,0x02,600},{0x00,0x03,600},{0x00,0x04,600},
(snip), {0x00,0xFE,600}],Num. of CUs=255
[FC]
FC function
Set SCP Time
Set State Change Pending (SCP) Time operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 25 Detailed Info: Set SCP Time Operation
DescriptionItem
The LDKC number.LDKC
Sample Audit Logs60