HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Format,,Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 in case of an external volume
+PG=[V1-1],Num. of PGs=1 in case of a vertual volume
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Install]
Install function
Format
Format operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 47 Detailed Info: Format Operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
NOTE:
The status of the LDEV will not change directly after the execution of the LDEV operation command. Therefore,
an error may occur after the execution of the command.
Install - Format Stop Operation
NOTE:
This log information is output when the format process is suspended.
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Format Stop,,Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 in case of an external volume
XP24000 Audit Log User and Reference Guide 77