Installation and Reference Guide for HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00 (AA-RW8SF-TE, March 2008)

hpdsm set device=1 policy=sqst
Device Name
: COMPAQ HSV111_(C)COMPAQ
Device Serial No. : 600508B4000149B500028000001D0000
Change Load Balance policy (y/n)? y
Load Balance policy changed. Verify by issuing "hpdsm devices" command.
Example:
hpdsm set device=all policy=rr
Successful for all the devices. Verify by issuing "hpdsm devices" command.
hpdsm set dev
ice alb
Syntax: hpdsm set device=x alb=y/n
Syntax: hpdsm set device=all alb=y/n
The hpdsm set
device alb command changes the Adaptive Load Balance setting for the device x
or for all the
devices depending on the input parameter specifi ed.
Example:
hpdsm set device=1 alb=y
Device Name
: COMPAQ HSV111_(C)COMPAQ
Device Serial No. : 600508B4000149B500028000001D0000
Change Adaptive Load Balance setting (y/n)? y
ALB settings changed. Verify by using "hpdsm devices" command.
Example:
hpdsm set device=all alb=y
Successful for all the devices. Verify by using "hpdsm devices" command.
hpdsm set device path
Syntax: hpdsm set device=x path=y
The hpdsm set device path command changes the preferred path for device x,asshowninthe
example below.
NOTE:
Use the hpdsm paths device command to view the available paths for the device.
30
Managing storage arrays using the HP MPIO EVA DSM with the CLI utility