Installation and Reference Guide for HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00 (AA-RW8SF-TE, March 2008)

Event ID Message
Description
Contents of the
data dump
37
DSM_name is attempting an
operation on pseudo-LUN.
The Type is noted in the
dump data.
DSM_name has called
DSMNotification on a
pseudo-LUN.
Thetypeof
notification called
by DSM
38
A device under pseudo-LUN,
being controlled by
DSM_name was removed,
but the DSM failed the
operation.
An MPIO call to DSM’s
RemoveDevice operation failed.
DSM ID of the failed
attempt
HP MPIO EVA DS
M event log messages
Table 5 lists
the HP M PIO EVA DSM event log messages and provides a description of each message.
Table 5 HP MPIO EVA DSM event log messages
Event ID Message
Descriptio
n
101
Discovered a new multipath
capable disk with serial
number X; first path SCSI
address Y.
A new multipath disk has been discovered. X
represents the serial number of the new disk. Y is
the SCSI address of the first path to this disk.
102
A new path (SCSI address
Y) was added to existing
multipath capable disk X.
A new path to an existing multipath disk has been
discovered. X represents the serial number of the
disk. Y is the SCSI address of the new path that
was found.
103
The path (SCSI address Y)
to multipath capable disk
X has recovered.
A failed path to an existing multipath disk has
recovered. X represents the serial number of the
disk. Y is the SCSI address of the path that h as been
recovered.
107
The preferred path (SCSI
address Y) for multipath
capable disk X has been
restored.
A previously selected path h as been restored as the
preferred path for I/O operation. X represents the
serial number of the disk. Y is the SCSI address of
the preferred path that has been restored.
108
The DSM has completed
remove processing for
path (SCSI address Y) to
multipath capable disk X.
The DSM has completed processing the removal
notification for a path to a given multipath disk. X
r epresents the serial number of the disk. Y is the
SCSI address of the path for which the removal
notification has been processed.
109
The DSM (version X) has
been started successfully.
TheDSMhassuccessfullycompletedtheinitialization
during startup. X is the version of the DSM.
11 0
The previously failed
multipath capable disk X
has recovered.
This message is logged when the DSM detects that
a pre viously failed (inoperative) multipath capable
disk with serial number X has recovered and
become operational again.
111
The removal event
notifications for
multipath capable disk
X have been disabled upon
request.
This event is logged when generation of removal
event notifications (Event IDs 304, 302 and 108) for
the multipath capable disk with serial number X has
been disabled upon request in the DSM.
HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00
41