Installation and Reference Guide for HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00 (AA-RW8SF-TE, March 2008)

Figure 1 MPIO Properties page with MPIO-ed Devices tab enabled
To manually add support for new devices, complete the following steps:
1. Click Add in the MPIO Properties page. The Add MPIO Suppor t page displays.
2. Enter the Vendor ID and Product ID for the new devices. All devices with this D evice Hardware
ID are ha
ndled by a DSM (either a vendor-supplied DSM or MS DSM).
To manually disable support for a device, select a Device H ardware ID and click Remove.
Discover Multi-paths
In the MPIO Properties page, click the Discover Multi-Paths tab. This tab displays the Device Hardware
IDs of the devices that suppor t multipathing, which are currently not mana ged but supported by MPIO.
Figure 2 shows the MPIO Properties page with the Discover Multi-Paths tab enabled.
44
Managing MPIO devices using Microsoft-provided interfaces on Windows Server 2008