Manualshelf

Installation and Reference Guide for HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00 (AA-RW8SF-TE, March 2008)

ManualsBrandsHP ManualsSoftwareHP StorageWorks VCS for Dual HSV110 Controllers V2.0-V3.0 Upgrade
41424344454647484950
Figure 2 MPIO Properties page with Discover Multi-Paths tab enabled
To enable
multipath support for the listed devices, select a Device Hardware ID, and click Add.
All devices with this hardware ID are h andled by a DSM (either a vendor-supplied DSM or MS DSM).
DSM Install
In the M PIO Properties page, click the DSM Install tab. This tab enables you to install a vendor-supplied
DSM.WhileinstallingaDSM,youmustspecifythedriverpath,theINFfile name, and the DSM
Hardware ID. Figure 3 shows the MPIO Properties page with the DSM Install tab enabled.
HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.00.00
45