HP XP P9000 Remote Web Console User Guide

Report Display dialog box
The Report Display dialog box provides the basic configuration information of the storage system.
This dialog box opens separately from Remote Web Console window, so you can configure settings
while viewing the dialog box.
To open the Report Display dialog box, open the Remote Web Console secondary window, then
click File→Reports.
The information provided in the Report Display dialog box is updated:
• If the tab is clicked on the Report Display dialog box and the displayed dialog box is changed.
• When the Refresh command is selected on the menu bar of the Remote Web Console main
window.
• When the tab is clicked on the Remote Web Console windows during the operation of the
product option and the displayed window is changed.
• When the Apply button is clicked on the Remote Web Console main window.
• When the operation mode is changed from the View mode to the Modify mode on the Remote
Web Console main window.
Common elements
The Report Display dialog box contains the following items:
• The title bar provides information about the connected storage system.
IP indicates the IP address of the SVP.◦
◦ S/N indicates the serial number.
◦ D/N indicates the device name specified in the Information window.
• To view the details about a LUSE volume in LUN or LDEV dialog box, select a LUSE volume,
right-click, and click Detail Information. The detailed information of the LUSE volume appears.
Items displayed in the dialog box are the same as the items displayed in the LDEV list.
• The LDEV ID column displays the LDKC number, the CU number, and the LDEV number. These
numbers are separated by colons (:). The following symbols might appear at the end of the
LDEV number:
◦ # (00:00:01#) indicates that the LDEV is an external volume.
◦ V (00:00:01V) indicates that the LDEV is a Fast Snap or Snapshot virtual volume.
Report Display dialog box 213