HP Storage Platform 2.0 Release Notes

• Disconnecting the cable from the HBA to an MSA or rebooting one or both of the MSA storage
controllers while hardware monitoring is active can result in unexpected hardware events.
(related to defect ids ALM1049, ALM1050, ALM1060)
Networking
The following are known network issues:
• If the blade is powered up before a Virtual connect profile can be assigned to the server the
server will have only 2 Ethernet devices (eth0 and eth1).
To resolve this power down the server and let it sit powered off in the chassis for 5 minutes then
you can power the server back on. (Related to defect id BZ24652)
Storage provisioning tool
See the HP HPSP_SPTT User Guide in SAW, document number c03597949-1.
Documentation changes and additions
N/A
Installation instructions
New Installations
The HP Storage Platform software is preinstalled on supported devices. If you need to reinstall the
software, see the administration guide for you storage system.
Upgrades
The upgrade procedure is provided in the administrative guide for your storage system. Contact
HP Support for assistance with the procedure.
Documentation feedback
HP is committed to providing documentation that meets your needs. For documents published
inHP.COM, mail is normally sent to [e-mail]
. However, these release notes are
only published in the Service Access Workbench, so to help is improve future HPSP
documentation such as this one and other HPSP platform guides please use the SAW web
interface feedback tab (circled below in red in this partial screenshot).
Please send any errors as well as suggestions for improvements. Include the document title and
part number, version number, or the URL when submitting your feedback.
HPSP 2.0 Release Notes 11