Technical Bulletin: Upgrading SAN Manager LM 1.1 QLA2200 Hosts to Storage Allocater 1.2

storage allocater technical bulletin Page 2 of 2
To Undo the HBA Configuration Changes for the 1.2 Upgrade:
1. Reboot the host.
2. During system startup, watch for QLogic configuration tool messages.
3. Press ALT + Q to break into the QLogic HBA configuration tool.
4. In the HBA configuration tool, select Configuration Settings .
5. Select Advanced Adapter Settings .
6. Set the Drivers Load RISC Code option to Enabled .
7. Save the new settings and reboot the host.