HP Storage Hardware Providers VDS/VSS Installation Guide (5697-1131, August 2011)

Figure 8 Mirrorclone tab setting window
.
Removing the HP P6000 hardware providers
Before removing the VDS or VSS provider, issue a net stop vds or net stop vss command
from the command prompt on the VDS/VSS server.
Removing HP P6000 hardware providers using Windows Control Panel
To remove the hardware providers:
1. In Windows, select Start > Settings > Control Panel.
2. Double-click Add or Remove Programs.
3. Select the program you want to remove (VDS or VSS).
4. Click Change/Remove. Windows removes the program.
NOTE:
You can also remove the HP P6000 hardware providers by starting the HP P6000 hardware
providers installer again.
1. Run the installer.
2. Click Next to open the Remove window.
3. Click Remove, and then click Finish.
4. Click Finish.
Removing HP P6000 hardware providers using Windows Server Core
You can remove the HP P6000 hardware providers by running the installers from a command prompt.
1. In a command window, switch to the location of the VSS and VDS install executables.
Installing HP hardware providers for HP P6000 disk arrays22