HP Storage Hardware Providers VDS/VSS Installation Guide (5697-1131, August 2011)

5. The Customer Information window opens. Enter your name and your company's name.
6. Click Next. A window opens to remind you that RAID Manager Library must be installed. If you
have not installed RAID Manager Library, click Cancel and install RAID Manager Library. Then
return to Step 2 above and perform the provider installation again.
7. Click Next. The Destination Folder window opens.
8. Click Next to install VDS/VSS in the default location, or click Change to browse for a new location,
and then click Next.
The Ready to Install the Program window opens.
9. Click Install to start the installation process.
A progress window opens to show installation status.
10. In the Installation Complete window, click Next.
The InstallShield Wizard Finish window opens.
11. Click Finish. The InstallShield Wizard exits.
12. Click Windows Start, Control Panel, Add/Remove Programs to check that the hardware provider
was installed as shown below. Then, close Add/Remove Programs without making changes.
13. Consult the HP Storage P9000 Hardware Providers Release Notes for required Microsoft quick
fixes (KBs) and install them on the VDS/VSS server.
Configuring VDS and VSS
To complete the installation, run the configuration utilities for the VDS and VSS hardware providers
you installed. Run both utilities if you installed both providers.
To run the configuration utility:
HP Storage Hardware Providers VDS/VSS Installation Guide 33