HP Version Control Repository Manager

NOTE: You can also configure the Automatic Update Settings using the Command Line Interface (CLI).
1. Click the Home tab. The Home page appears.
2. Click the Configure the Repository and Automatic Update Settings link. The Repository Directory
page appears.
3. In the Directory field, enter the location that you want to monitor for components and HP ProLiant and
Integrity Support Packs . This must be a local path on the repository system. Be sure that the directory
can be accessed with read-write privileges by the VCRM Win32 service. Click Reset to restore the
original directory setting, or you can click Cancel to abort the change.
Note: The directory path cannot contain the ampersand (&) character. If this character is used, the
VCRM is unable to change the settings.
4. Click Next. The Download HP ProLiant and HP Integrity Support Packs for Operating System
page appears.
Select the operating systems from the list. VCRM downloads the HP ProLiant Support Packs and HP
Integrity Support Packs for the selected operating systems during the scheduled update.
5. Click Next. The Automatic Update Settings page appears.
a. Select the Enable automatic downloading of new HP ProLiant and HP Integrity Support
Pack and components from Hewlett-Packard's website at a specified interval and time
option if you want the repository to automatically update.
Note: If you select the option to automatically receive updates, the Download schedule settings
enable you to configure the frequency and times that you want to automatically update.
b. In the Interval between updates field, select how often you want to update automatically from
the dropdown menu.
20 Navigating the software