HP Version Control Repository Manager

c. In the Day of Week and Time of Day fields, select the day of the week that you want to

automatically update from the dropdown menu, then in the next field, select the time you want to

automatically update from the dropdown menu.

Note: If you select one day or two days from the Interval between updates option, the Day of

Week option is unavailable because the update happens daily, or every two days, from the day

you made the selection.

Note: If the VCRM service does not connect to the Internet through a proxy server, proceed to step

d. In the Proxy field, enter the proxy server name and click Set Proxy Server. The Proxy Server

Settings dialog box appears.

Note: The proxy settings enable you to set the name or IP address of a proxy server, the proxy port,

be entered, but the other fields can be left blank if appropriate. If you do not enter a server name,

the other values are not saved.

e. In the Proxy Ser ver Name field, enter the name of the proxy server. Clear this field to remove all

proxy server settings.

f. In the Port field, enter the port address. This value is ignored if the Server Name is blank.

g. In the Proxy Server Login field, enter a login name. You can leave this blank if the proxy does

not require authentication.

Note: If you are using an authenticating proxy server and have supplied a login user name in this

field, you might need to configure the VCRM Windows (Win32) service to log on with a user

account, instead of LocalSystem, which is the default.

h. In the Password field, enter the password associated with the Proxy Server Login you just

entered. This field is ignored if the Login field is blank.

i. Click OK. Your new proxy settings are saved and you are returned to the Automatic Update

Settings dialog box. Click Cancel to return to the Automatic Update Settings dialog box, if

you do not want to enter the proxy server settings. The configuration you specified appears in the

wizard.

j. When the upload task completes, view the Log to confirm that all of the ProLiant and Integrity

Support Packs and components were successfully uploaded to the VCRM.

6. Click Finish. Click Reset to return the settings back to the previous settings, Back to return to the

previous page, or Cancel to abort the operation. If you have enabled the automatic update feature,

the connection is tested at this time. If an error occurs, the settings are not saved, and you remain on

the automatic update settings page to correct any errors.

7. Click Save. Your changes are saved and you are returned to the Catalog page. You can click Cancel

to abort the component configuration.