System Management Homepage 7.1 User Guide

321
Apply
Record the option into the
XML configuration file.
Enables Autostart mode.
Sets Port 2301 as enabled
or disabed.
Enable Port 2301
Sets Port 2301 as enabled
or disabed.
To enable or disable Port 2301, complete the following steps:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 and Autostart link.
4. To enable Port 2301, check Port 2301 check box. To disable Port 2301, clear the Port 2301
check box.
5. To enable Autostart mode, check Autostart check box. To disable Autostart mode, uncheck
Autostart check box.
NOTE: Enabling the Autosart mode, enables port 2301 automatically, if it is disabled.
NOTE: Enabling Autostart mode enables server timeout (in minutes) text box which provides
you with the option to set the server timeout duration, value between 0 and 60. The default
timeout value is 30 minutes.
6. Click Apply.
Port 2301 (Windows only)
The Port 2301 link provides options to enable or disable Port 2301. The default value, enabled,
which preserves the compatibility with HP Web-enabled System Management Software.
21
Apply
Record the option into the
XML configuration file.
Enable Port 2301
Sets Port 2301 as enabled
or disabed.
IMPORTANT: Consider the following before you disable port 2301:
If you disable port 2301 when HP SMH is in autostart URL mode, the start mode automatically
changes to start on boot mode.
36 The Settings page