Deploying HP SIM 5.x on MSCS clusters on Windows 2003 with SQL Server 2005 481363-002, 02/2009

42
Figure
17
:
The HP SIM 5.x home page
Note:
Navigate to
Options

Discovery
. Select
System Automatic Discovery
task a
nd click
Edit
. The
Edit Discovery
page appears. Take a look at the
Ping inclusion ranges
list box (on the left side of
the right frame, near the bottom of the screen). Note that HP SIM 5.x automatically generates a
range for each of the IP addresses the cu
rrent system has. Because one of these ranges is based
on the cluster heartbeat IP address (generally of the form 10.0.0.1), that range would not be of
any use, and you should remove it from the list in order to prevent future confusion. Be sure to click
O
K
.
IMPORTANT:
Navigate to the
Options

Protocol Settings

WMI Mapper Proxy. Check the Host
list
and ensure that the cluster virtual name is used instead of any of the system names (delete the
system name, if it is used, and add the cluster virtual name).
8.
Re
turn to the Cluster Administrator.
9.
Repeat steps 2 through 6 in the
Validating the installation
using
the other system.
Note
:
These steps are to ensure HPSIM is working after failover.
10.
You should be able to use the active system nam
e to establish a command
-
line session to the
cluster HP Systems Insight Manager service from a client system that has an
OpenSSH
client
installed, using SSH.
Note:
The only exception is when the disk group containing the HP SIM program files (HP SIM
Disk
Group in this paper) has failed
-
over to the other system. In this case, a failing message