HP System Insight Manager with HP Command View EVA

White paper | HP Systems Insight Manager
35 | March 2013
<interopnamespace name=“root/emulex”/>
<interopnamespace name=“root/qlogic”/>
<interopnamespace name=“root/ibm”/>
<interopnamespace name=“root/emc”/>
<interopnamespace
name=“root/smis/current”/>
<interopnamespace
name=“root/hitachi/dm51”/>
<interopnamespace name=“interop”/>
<interopnamespace name=“root/interop”/>
<interopnamespace name=“root/switch”/>
<interopnamespace name=“root/cimv2”/>
</interopnamespacelist>
</port>
<port id=“60000” protocol=“https”>
<interopnamespacelist>
<interopnamespace name=“interop”/>
</interopnamespacelist>
</port>
</wbemportlist>
4. Save the changes.
5. Restart the HP SIM service.
6. Select OptionsIdentify Systems. Re-identify all WBEM/WMI systems in HP SIM to
correct the port reference.
HP CV EVA
The HP CV EVA installation kit includes SMI-S as a component. At installation time, SMI-S assigns
the following as default ports if they are available:
HTTP port=5988
HTTPS port=5989
If one or both of these ports are in use, a screen appears on which you can change the port
numbers. The SMI-S installer suggests port 60000 if that port is not in use. SMI-S retains port
5988 if it does not conflict with another port number. SMI-S uses these ports when the HP CIMOM
process starts.
Note: This screen appears only if a port conflict is detected, which is why HP recommends
installing HP SIM before installing Command View.