HP Systems Insight Manager 7.2 Installation and Configuration Guide for Microsoft Windows

4 Setting up and configuring managed systems
At this point, steps 1 and 2 below are complete. Perform step 3 to install and configure the required
management software.
1. Install and configure the CMS. See “Installing HP Systems Insight Manager on the CMS for
the first time” (page 26).
2. Configure HP Systems Insight Manager for your environment. See “Configuring HP Systems
Insight Manager” (page 41).
IMPORTANT: You must run Discovery before setting up managed systems. See Configuring
HP Systems Insight Manager. Configuring Automatic Discovery is part of the First Time Wizard.
3. Install and configure the required management software on the systems that will be managed
by the CMS. The procedure to complete this step is in this chapter.
4. Configure the remaining protocols for the managed systems. The procedure to complete this
step is in this chapter.
Overview
Setting up managed systems involves installing the required management software. The management
software being installed depends on the type of managed system
• Storage Systems
• Windows systems (see the HP Systems Insight Manager Installation and Configuration Guide
for Microsoft Windows at http://www.hp.com/go/insightmanagement/sim/docs)
• HP-UX (see the HP Systems Insight Manager Installation and Configuration Guide for HP-UX
at http://www.hp.com/go/insightmanagement/sim/docs)
• Linux (see the HP Systems Insight Manager Installation and Configuration Guide for Linux at
http://www.hp.com/go/insightmanagement/sim/docs)
Setting up managed systems using the HP Systems Insight Manager interface
The Insight managed system setup wizard and Configure or Repair Agents tools, enable you to
configure your managed systems by installing agents, applying licenses, and executing configuration
steps. To run these tools against multiple systems simultaneously, you must have authorizations to
run the managed system setup wizard and Configure or Repair Agents tools. You must have full
CMS configuration privileges to modify the HP Systems Insight Manager community strings in the
node security file. In addition, you must enter root or administrator level user credentials for the
target system.
The Insight managed system setup wizard is a Systems Insight Manager plug-in tool that simplifies
configuring Insight Management components for use on managed systems. The wizard is especially
useful to configure managed systems for use with Matrix Operating Environment components, but
it can also be used to set up managed systems for Insight Control and Systems Insight Manager.
Overview 45