Installing and configuring HP SIM 6.x on HP Integrity VM

7
HE: Main Help Menu
X: Exit Connection
[vm01] vMP> CO
Note:
The virtual console will have a lower case ‘
v
’ in from of the Management
Processor (MP).
In st
a llin g
th e
operating
sy s te m
o n
th e
g u e st
There are two ways to install the HP
-
U
X OS on the virtual machine guest:

Physical DVD

Ignite Server
To install
us
ing a physical DVD device, ens
u
re t
h
e DVD was added to the g
u
est, as explained in
Adding USB DVD Player.
Launch the virtual console to access the EFI Boot Man
a
ger. The EFI Boot Manager is the initial screen
that displays d
u
ring the boot p
rocess.
If the
screen displays a command prompt,
then
you
must
reset
the system. This can be done by going b
a
ck to the MP screen and using the Reset command:
[vm01] vMP>CM>RS
After executing the command, go back to the console to see the EFI Boot Manager,
as shown
:
EFI Boot Manager ver 1.10 [14.62] [Build: Tue Nov
8 09:15:06 2005]
Please select a boot option
EFI Shell [Built
-
in]
Boot option maintenance menu
Use ^ and v to change option(s). Use Enter to select an option
After
the EFI Boot Manager
appears
:
1.
Se
lect
EFI Shell
.
2.
Enter
fs0: INSTALL
.
The installation start
s
.
To boot from LAN,
make s
u
re you have access to an I
g
nite Server and that it is
config
u
red correctly
for a
PXE request. Launch the virtu
a
l console to access the EFI Boot Manager
:
EFI Boot Manager
ver 1.10 [14.62] [Build: Tue Nov
8 09:15:06 2005]
Please select a boot option
EFI Shell [Built
-
in]
Boot option maintenance menu
Use ^ and v to change option(s). Use Enter to select an option
.
After
the EFI Boot Manager
appears
:
1.
Select Boot option maintena
nce menu
.
2.
Select Add a boot option
.
3.
Select the device with a
M
AC Address,
whic
h
is the LAN
.
–
Enter a Description: lan1boot
.
–
Enter
N
for no boot
options
.
–
Save in NVRAM and then
select
[Exit]
.
4.
Select
lan1boot
.