HP Systems Insight Manager 6.2 Installation and Configuration Guide for Linux

For example, if two CIMOMs exist on the same host, you must configure them to use different ports to
communicate with the CMS.
Configuring Systems Insight Manager to discover storage systems
After verifying that each storage system’s SMI-S provider is installed and configured, configure Systems
Insight Manager to discover the storage systems by performing the following steps:
1. Enter the user name and password for each provider’s SMI CIMOM in the Default WBEM settings
section on the Setting Global Protocols page.
2. Add each SMI CIMOM IP address to the System Automatic Discovery task or to the Creating a
New Discovery task. For more information, see the HP Systems Insight Manager 6.2 User Guide at
http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html.
Systems Insight Manager discovers the storage systems after the next automatic discovery task. To discover
your storage systems immediately, run the discovery task as described in the “Running a Discovery Task”
section of the HP Systems Insight Manager 6.2 User Guide at http://h18013.www1.hp.com/products/
servers/management/hpsim/infolibrary.html.
Configuring Systems Insight Manager to discover storage systems 27