Creating custom tool definition files for HP Systems Insight Manager 5.1 or greater (481365-002, January 2009)

20
Appendix A: tool type
-
specific requirements
SSA
-
specific attributes
Table A
-
1
lists the SSA
-
specific attributes.
Table A
-
1
.
SSA
-
specific
attributes
Attribute
Syntax [1]
Description
ssa
-
block
<ssa
-
block>
(command/copy
-
block
attributes) </ssa
-
block>
You should specify only one command or copy
-
block or both; however, you
may specify up to 16 multiple copy
-
blocks can be specified. After the
co
mmand and/or copy
-
blocks, one may specify the parameters for the
command and/or copy
-
block.
command
<command> (parameter)
</command>
Specifies the command for an SSA tool. If the command accepts
parameters, you must specify the command as a
parameterized string
. This
element may have two attributes: command
-
type and log.
copy
-
block
<copy
-
block> (attribute
data) </copy
-
block>
Specifies a source file path and a destination file path for a copy
operation. The
source element specifies the source file path for a copy
operation. The destination element specifies the destination file path for a
copy operation. The default permission of the copied block is 755. The
chmod command is required to set a custom permissi
on.
NOTE:
[1]
Replace i
talicized text between start and stop tag
s
with actual
attribute/value/data. Non
-
italicized text represents valid entry
option.
You must specify v
alues for attributes; there are no default
values.