HP SIM V5.1 User Guide (356920-009, January 2007)

1. Select Tools→System Information→Cluster Monitor.

Note: Cluster Monitor is not displayed in the menu if there are no MSCS clusters discovered.

2. Select a target MSCS cluster, and click Run Now. See “Creating a task” for more information on

selecting a target cluster.

1. Locate a cluster by expanding Systems under the System and Event Collections panel and selecting

a cluster collection.

The appropriate cluster collection table appears in the workspace.

Note: Only the MSCS clusters you are authorized to access display on the cluster table view page.

2. Choose one of the following:

• Click the name of the MSCS cluster in the Cluster Name column.

• Click the MSCS cluster status icon in the CS column on the cluster table view page.

The Cluster Monitor page appears for that cluster.

There are four tabs available on the Cluster Monitor page.

NOTE: Every tab includes a Problem Info section that gives detailed information of any problems reported

on the tab. For example, on the Cluster tab, this section includes status information if the cluster has a status

of anything other than Normal.

NOTE: Each tab also includes a Last Update field that displays the last time the information on the tab

was updated.

• Cluster Includes cluster information, such as the cluster status, name, IP address, and quorum.

• Nodes Includes node information such as the node status, name, and IP address.

• Network Includes network information, such as the network status, name, mask, state, role, and

description.

• Resources Includes MSCS Resource information for the cluster including the status, name, IP address,

state, group, owner node, type, and drive of the resources.