HP Systems Insight Manager 6.2 Installation and Configuration Guide for HP-UX

Minimum ProLiant
Support Pack (PSP)
required
Windows
Operating Systems
Supported
1
Minimum Integrated
Lights-Out (iLO) / iLO 2 /
firmware version
required
Minimum BIOS – System
ROM required
Product Models
7.20 or laterWindows and Linux1.70 or laterProLiant BL45p
7.60 or laterWindows and Linux1.24 or later2007.09.23 (A)ProLiant BL45p G2
(4 Dec 2007)
1 For specific version of the operating systems, browse the ProLiant support matrix at
http://h10018.www1.hp.com/wwsolutions/index.html
Table 1-8 Supported c-Class Interconnects/Switches
Minimum Software Management firmware versionProduct Models
12.2(25)SEF1Cisco Catalyst Blade Switch 3020 for HP c-Class Blade System
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120G for HP
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120X for HP
3.3(1a)Cisco MDS 9124e Fabric Switch
1.0.0HP 1:10Gb Ethernet BL-c Switch
NAHP 1Gb Ethernet Pass-Thru Module for HP c-Class BladeSystem
1.1.0HP 10Gb Ethernet BL-c Switch
1.0.0HP 1/10Gb Ethernet Blade Switch
1.22HP 1/10Gb Virtual Connect Ethernet Module
1.22HP 1/10Gb-F Virtual Connect Ethernet Fiber Module
NAHP 1/10Gb-F VC Module
NAHP 3Gb SAS BL-c Pass-Thru Module
NAHP 4Gb Fiber Channel Pass-Thru Module for c-Class BladeSystem
1.22HP 4Gb Virtual Connect Fiber Channel Module for c-Class
BladeSystem
2.0.4HP GbE2c Ethernet Blade Switch for HP
2.0.4HP GbE2c Layer 2/3 Ethernet Blade Switch
2.25HP Virtual Connect Flex-10 10Gb Ethernet Module for BladeSystem
c-Class
NAHP Virtual Connect 8Gb Fibre Channel Module (24-port)
NABrocade 8Gb SAN Switch for HP BladeSystem c-Class
Boot code version 4.4.14 and MBA version 4.4.16HP NC382m Dual Port 1GbE BL-c Adapter
4.04.04QMH2562 8Gb FC for HP BladeSystem c-Class
Boot code version 4.5.10 and MBA version 4.5.20HP NC532m Dual port 10GbE BL-c Adapter
1.10a4LPe 1205-HP 8Gb FC for c-Class
NAHP 3G SAS BL Switch Module
1 For more information on the IP Base IOS firmware package, see www.hp.com.
Table 1-9 Supported e-Class Interconnects/Switches
Minimum Software Management firmware versionProduct Models
1.1.1.4 Rev. AHP BladeSystem PC Blade Switch
2.1.6 AHP ProLiant BL e-Class (C-GbE) Interconnect Switch
16 Installation overview and requirements