HP Systems Insight Manager 7.2 Database Tables

DescriptionData TypeColumn Name
system with same device key as the WMIProxyID for
making WBEM to requests through the WMI Mapper
running on that other system)
DeviceSnmpSettings table
The DeviceSnmpSettings table contains the SNMP settings currently configured for the systems. The
DeviceSnmpSettings fields are defined in the following table.
DescriptionData TypeColumn Name
Associates a system with its collected set of data (this
system information is linked using the DeviceKey from
the devices table)
INT*DeviceKey
The network timeout value in secondsINTnetworkTimeout
The number of retries to be used for SNMP requestsINTnetworkRetries
ICMP ping timeout value in secondsINTicmpTimeout
The number of ICMP ping retries to performINTicmpRetries
Defines if this system uses defaults (Global protocol
settings) for some or all protocols or its individual
INTdefaultProtoMask
settings (This is a bitmask field where the different
bits define what defaults are to be used. The values
are logically ordered together: 1= use the default
SNMP read community, 2 = use the default SNMP
write community, 4 = use the default SNMP timeout,
8 = use the default SNMP retries, 16 = use the
default icmp timeout, 32 = use the default ICMP
retries, 64 = use the default WBEM user name, 128
= use the default WBEM password)
NOTE: An asterisk (*) indicates that the field is part of the primary key of the table. Where
multiple fields in the same table show an asterisk, the primary key connects to each.
DeviceStatusResults table
DescriptionData TypeColumn Name
INTNoticeId
INTPrevStatusValue
INTStatusSourceId
DeviceStatusSource table
DescriptionData TypeColumn Name
CHAR(50)StatusSourceName
INTStatusSourceId
CHAR(128)StatusInterfaceClass
Database tables 63