HP Systems Insight Manager 7.3 Installation and Configuration Guide for Microsoft Windows

◦ Microsoft Windows Server 2008 R2 SP1 with Hyper-V running guest Windows
◦ Microsoft Windows Server 2008 R2 with Hyper-V running guest Windows
◦ VMware ESX 4.0 Update3 running guest Windows
◦ VMware ESXi 4.0 Update3 running guest Windows
◦ VMware ESXi 4.0 Update2 running guest Windows
◦ VMware ESX 4.1 Update1 running guest Windows
◦ VMware ESXi 4.1 Update1 running guest Windows
◦ VMware ESX v3.5 Update 4 running guest Windows
◦ VMware ESXi v3.5 Update 4 running guest Windows
◦ VMware ESX v3.5 Update 5 running guest Windows
◦ VMware ESXi v3.5 Update 5 running guest Windows
◦ VMware ESX 4.0 Update 2 running guest Windows
◦ VMware M/N (ESXi 5) Lockdown mode (Initial Release)
◦ VMware 5.0 stateless
◦ VMware 5.0 statefull
• Microsoft Hyper-V Server 2008 R2 SP1 running guest windows
• Microsoft Hyper-V Server 2008 R2 running guest windows
• Microsoft Hyper-V Server 2008 SP2 running guest windows
• Microsoft HyperV Server 2012
• Microsoft Hyper-V Server 2012 R2
• The Central Management Server supports Microsoft Windows 2003, Microsoft Hyper-V Server
2012 International Server - French, German, Italian, Spanish, Korean, Chinese, and Japanese
(latest service pack available for each language).
Hardware
Any HP ProLiant with the following configuration:
• Minimum: 1.5-GHz processor with 4 GB RAM (for x86)/ 4 GBRAM (for x64)
• 1 GB free disk space recommended
• Recommended: 2.4-GHz processor with 6GB RAM ( for x86) / 6 GB RAM (for x64)
NOTE: HP Insight Remote Support does not support ProLiant ML/DL 100 series servers. If
you are using HP Insight Remote Support, you must use a ProLiant 300, 500, 700, or Blade
Server. For information about using HP Insight Remote Support with HP SIM, system
requirements and product support, see the Insight Remote Support documentation at: http://
www.hp.com/go/insightremotesupport/docs.
NOTE: If Microsoft SQL Server is installed on the CMS, an additional 512 MB of RAM
should be installed.
NOTE: HP Netserver platforms can be used for the Central Management Server as long as
the Instant Toptools software is not installed and all other requirements are met.
System requirements 7