Systems Insight Manager 6.2 Installation and Configuration Guide for MS Windows

6. The reboot option is presented on this screen. The Yes, reboot the system now option is selected by

default. Click Finish to allow the system to reboot. This completes the typical installation process. For

more information, see “Next steps”.

NOTE: For more information regarding where the System Management Homepage default settings

are stored during a Typical installation and how to change them, see the

System Management Homepage

Installation Guide

at http://h18013.www1.hp.com/products/servers/management/agents/

documentation.html.

Next steps

For any system running Windows XP Service Pack 2 and any version of HP Systems Insight Manager and

HP System Management Homepage or any system running Windows XP Service Pack 2 and browsing to

HP Systems Insight Manager running on any supported operating system, you must complete the following.

• Procedure 2-3 Configure Windows XP Service Pack 2 firewall to allow access to HP System Management

Homepage

1. On the Windows XP system, select Start→Settings→Control Panel→Security center→Windows

Firewall to configure the firewall settings.

2. Click the Exceptions tab, and then click Add Port.

3. Add the following exceptions to the firewall protection. Enter the product name and the port number

for each.

Table 2-1 Firewall protection exceptions

ProtocolPortDescription

TCP2301HP SMH Web Server

TCP2381HP SMH Secure Web Server

TCP5988WBEM/WMI Mapper

TCP5989WBEM/WMI Mapper Secure Port

SSH22SSH port

SNMP161SNMP Agent

26 Installing HP Systems Insight Manager on the CMS for the first time