HP Systems Insight Manager 5.2 Installation and Configuration Guide for HP-UX

• Specify additional system properties to use only if Identification fails on this system.
Includes:
• System type Click the down arrow and select the appropriate System type.
• System subtype Click the down arrow and select the appropriate System subtype. You can
input up to eight different system subtypes.
• Product model Enter the system model number here. This field is free form.
• WBEM Settings
• User name
• Password If you do not want to use the default global values for the WBEM user name
and password, select Use Custom , and then enter custom values.
If you are manually discovering a storage system , ensure that the user name and password
of the SMI CIMOM are present in the global protocol settings, or enter them here as custom
values. To view the global settings, select Options→Protocol Settings→Global Protocol
Settings.
For Windows-based systems, the user name should include the domain name. For example,
domainname\username .
Note: OpenWBEM is not supported.
• SNMP Settings If you do not want to use the default global values for the SNMP settings,
select Use Custom, and enter custom values.
• Timeout (in seconds) The amount of time HP SIM waits for an SNMP response when
it sends a request to the system. If a response is not received within this time interval,
HP SIM might determine that the system does not support SNMP. Decreasing this value
can case increased network traffic because the rate of retry attempts is increased. Use
caution when changing this value. A value of three seconds usually works for a LAN.
46 Configuring HP SIM using the Options menu