HP Systems Insight Manager 5.2 Installation and Configuration Guide for HP-UX

swremove mysql
• If Servicecontrol Manager is not configured or if HP SIM 4.x is installed and you want to continue to
use HP SIM, you must select HP SIM 5.x for upgrade.
Execute the following command:
-x match_target=true
Use this option or use the interactive mode to select HPSIM-HP-UX.
You can also specify HPSIM-HP-UX on the command line. The HP SIM 5.x installer will upgrade both
a configured and an unconfigured HP SIM 4.X. If you chose to remove either HP Servicecontrol Manager
or HP SIM, execute the following command to remove subdirectories that were used in the product:
rm -fr /opt/mx /etc/opt/mx
If these subdirectories are not removed, you might encounter database errors when trying to run
mxinitconfig -a when installing HP SIM 5.x.
Servicecontrol Manager and HP-UX 11i
Upgrading your system from HP-UX 11i v1 to HP-UX 11i v2 with HP Servicecontrol Manager 2.5 configured
will fail if HP SIM is selected for installation during the upgrade. To upgrade from SCM 2.5 to HP SIM 5.x,
you will first have to upgrade HP SIM from SCM 2.5 to HP SIM 4.2 and then to 5.x.
Solution: Determine if HP Servicecontrol Manager 2.5 or earlier is installed on your system by entering the
following commands:
swlist -1 bundle B8337BA B8339BA B8338BA
swlist -1 product ServControlMgr AgentConfig SysMgmtServer SysMgmtAgent
Note the version number. If the version number is A.02.05.xx or earlier, then remove Servicecontrol Manager
from your HP-UX 11i v1 system. Also note whether the file /var/opt/mx/dta/.inititalization
exists. If this file exists on your system, then remove Servicecontrol Manager from your HP-UX 11i v1 system
before upgrading to HP-UX 11i v2. Uninstall HP Servicecontrol Manager using the following command:
swremove ID
where ID is the product or bundle ID. For example:
swremove -x enforce_dependencies=false B8339BA
swremove -x enforce_dependencies=false SysMgmtServer SysMgmtAgent
Remove the old product subdirectories by executing the following command:
rm -fr /opt/mx /etc/opt/mx
Upgrade
When upgrading from previous versions of HP SIM to HP SIM 5.x, tools that are now obsolete can remain
in the Monitor Tools toolbox.
If upgrading from HP SIM 4.2 or later, the tools are listed in the following table:
General toolsMonitor tools
General Toolstype
General toolscat
General toolsfind
If upgrading from a version prior to HP SIM 4.2, the tools are listed in the following table:
General toolsMonitor tools
General toolstype
General toolscat
General toolsfind
68 Troubleshooting