HP Systems Insight Manager 7.3 Installation and Configuration Guide for Linux

For specific version of the operating systems, browse the ProLiant support matrix at http://h10018.www1.hp.com/

wwsolutions/index.html

Table 8 Supported c-Class Interconnects/Switches

Minimum Software Management firmware versionProduct Models

12.2(25)SEF1Cisco Catalyst Blade Switch 3020 for HP c-Class Blade

System

IP Base IOS firmware package

Cisco Catalyst Blade Switch 3120G for HP

IP Base IOS firmware package

Cisco Catalyst Blade Switch 3120X for HP

3.3(1a)Cisco MDS 9124e Fabric Switch

1.0.0HP 1:10Gb Ethernet BL-c Switch

NAHP 1Gb Ethernet Pass-Thru Module for HP c-Class

BladeSystem

1.1.0HP 10Gb Ethernet BL-c Switch

1.0.0HP 1/10Gb Ethernet Blade Switch

1.22HP 1/10Gb Virtual Connect Ethernet Module

1.22HP 1/10Gb-F Virtual Connect Ethernet Fiber Module

NAHP 1/10Gb-F VC Module

NAHP 3Gb SAS BL-c Pass-Thru Module

NAHP 4Gb Fiber Channel Pass-Thru Module for c-Class

BladeSystem

1.22HP 4Gb Virtual Connect Fiber Channel Module for c-Class

BladeSystem

2.0.4HP GbE2c Ethernet Blade Switch for HP

2.0.4HP GbE2c Layer 2/3 Ethernet Blade Switch

2.25HP Virtual Connect Flex-10 10Gb Ethernet Module for

BladeSystem c-Class

NAHP Virtual Connect 8Gb Fibre Channel Module (24-port)

NABrocade 8Gb SAN Switch for HP BladeSystem c-Class

Boot code version 4.4.14 and MBA version 4.4.16HP NC382m Dual Port 1GbE BL-c Adapter

4.04.04QMH2562 8Gb FC for HP BladeSystem c-Class

Boot code version 4.5.10 and MBA version 4.5.20HP NC532m Dual port 10GbE BL-c Adapter

1.10a4LPe 1205-HP 8Gb FC for c-Class

NAHP 3G SAS BL Switch Module

For more information on the IP Base IOS firmware package, see www.hp.com.

Table 9 Supported e-Class Interconnects/Switches

Minimum Software Management firmware versionProduct Models

1.1.1.4 Rev. AHP BladeSystem PC Blade Switch

2.1.6 AHP ProLiant BL e-Class (C-GbE) Interconnect Switch

HP CloudSystem Integrated Manager requirements 25