README - HP Systems Insight Manager 5.3

Running SNMP System Type Manager identification.
Found matching SNMP System Type Manager rule, added as possible system type
Checking for DMI protocol support.
The Windows CMS cannot communicate with HP-UX or other DMI, skipping.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The system supports SSH protocol
Running Storage identification.
There were no storage profiles found on this system.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
Checking if this system is supported by Insight Power Manager.
Insight Power Manager is supported.
Running VM identification.
The system is a Virtual Machine Host
Building system relationships.
Running limited data collection for common attribute.
[WBEM] System identified as WBEM instrumented but no usable WBEM credentials
available. Check configuration and rerun Identification.
Root Cause: Identification failed to generate relevant WBEM credentials
for target system.
Corrective Action: Check network and configuration of target system. Check
the following pages to ensure appropriate WBEM credentials and port number
data are provided: Global Protocol Settings, System Protocol Settings.
Rerun Identification and Data Collection.
The SSH is not configured on this system
The system does not have SMH or SSO support.
Running node communication diagnosis
System identification done with this system.
Workaround
Go to http://communities.vmware.com/message/914939#914939. Note that the fix above references
3_files in the install queue. However, the number might vary by installation.
-------------------------------------------------------------
I am unable to identify Windows XP targets through WBEM if 'Simple File Sharing' is enabled.
Uncheck Simple File Sharing by navigating to Tools→Folder Options→View or set the security policy
Network access: Sharing and security model for local accounts to Classic: Local users authenticate as
themselves.
-------------------------------------------------------------
The new SSH identification method cannot be used to form associations between DL100 series systems; such
as the DL160 G5 and DL180 G5 and their management processors. There is an incompatibility between
the system UUID presented by the system and the UUID presented by the BMC (management processor)
firmware.
-------------------------------------------------------------
Identification 27