Systems Insight Manager 6.1 User Guide

Viewing individual storage systems
Procedure 22-7 Viewing individual storage systems
1. In the System and Event Collections panel, expand Systems, Shared, Systems by Type, and
Storage Systems.
2. Expand the storage system collection that contains the system you want to view.
3. Click the name of the storage system you want to view.
The System Page for that system appears.
Viewing storage system reports
Systems Insight Manager provides predefined and customized storage system reports.
If HP Storage Essentials is installed, no data appears in the Systems Insight Manager storage system reports.
This information appears because Systems Insight Manager data collection from SMI-S devices is disabled
to avoid duplicate data collection from both Systems Insight Manager and HP Storage Essentials. For
information about storage system reporting with HP Storage Essentials, see your HP Storage Essentials
documentation.
Existing storage system reports
The following predefined storage system reports are available:
• Storage Device Capacity—All Storage Arrays Lists capacity usage details for all storage arrays.
• Storage Device Controllers—All Storage Arrays Lists the status, port count, and number of ports utilized
for each storage array controller.
• Storage Device Inventory—All Storage Arrays Lists vendor, status, and port information for each
storage array.
• Storage Device Inventory—All Storage Switches Lists vendor, status, and port information for each
storage switch.
• Storage HBAs—All Storage Hosts Lists vendor, status, and port information for each host bus adapter
(HBA) that is installed on a storage host.
• Storage Logical Units—All Storage Arrays Lists LUN information and status for all LUNs on all storage
arrays.
• Storage Ports—All Storage Arrays Lists port information for all storage arrays.
• Storage Ports—All Storage Hosts Lists port information for all storage host HBAs.
• Storage Ports—All Storage Switches Lists port information for all storage switches.
• Changer Devices—All Tape Libraries Lists the name, firmware version, and status for all tape libraries.
• Media Access Devices—All Tape Libraries Lists the name, firmware version, and status for all tape
libraries.
Viewing storage array capacity
Systems Insight Manager enables you to view capacity details for either a single storage array or all arrays.
Viewing storage capacity for all arrays
To view storage capacity for all arrays, run the Storage Device Capacity-All Storage Arrays report.
104 Storage integration using SMI-S